How to repair a crack in a concrete swimming pool

 


Are you worried your pool maintenance is falling short? Have you noticed that there’s a crack in it? And do you want to learn how to repair it? If the answer to any of these questions is yes, this is the article for you. I’m going to tell you exactly how you can get your pool looking as good as new at a minimal cost.

 

But before getting into it, there’s one very important thing you need to know. A little damage doesn’t mean you’ll need to re-do your entire backyard. You don’t need to replace your pool, and anyone telling you is just trying to make money off of you.

 

The exact fix depends on how severe the crack is; however, there is always a solution.


Diagnose the crack

You won’t be able to figure out how to repair a crack in a concrete swimming pool until you know what you’re dealing with. Therefore, the first step on your journey of pool renovation and pool maintenance is identifying what classification the crack belongs to.

 

The most common type is a surface crack. These come about when concrete is drying and is more likely to come up in a freshly poured pool. The good thing about them is that they don’t always lead to leakages. Just keep an eye on them, and you’ll be fine.

 

A more dangerous type of crack is structural. If you have one of them, your pool will definitely leak. It could be from either side or even from the bottom, but the point is that it will happen, and you need to deal with it as soon as possible, and consider getting a full pool renovation.


The Solution

There are a bunch of different ways to repair concrete pool cracks. Some of the most common and effective ones are:

 

● Putty

If you know that you have a surface crack, all you need to do is apply putty. Grab a screwdriver and scrape the damaged area. Then apply putty.

 

● Plastering

For a bit more serious cracks, you should consider plastering. This is the ideal solution for ruptures that fall in between a massive surface and minor structure. Drain your pool, take out the relief plugs, and get to work. This is a bit more complicated than the last technique, and if you’re unsure of how to go about it, call a professional.

 

● Stapling

If the crack goes from one end of your pool to the other, the only viable option for you is stapling.

 

● Epoxy

This method injects an epoxy sealant into cracks and seals up the damaged areas. You can’t do it yourself and will need to call in an expert.

 

● Fresh caulk

The last technique on this list is using fresh caulk. It works for expanding pools and requires draining, sand-cutting the crack, filling it, and removing any excess caulk left.


Final Word

While you can learn how to repair a crack in a concrete swimming pool yourself, it’s not worth the risk or effort. Call Sunrise Pool Services at 678-804-0050, and we’ll do it for you. We’re experts in pool renovation, maintenance, and more. You can also visit our website by clicking External link opens in new tab or windowhere.

 ·