With summer right around the corner, you are probably looking forward to making a splash in your family’s favorite place—the pool! However, while the water might be a carefree place for you to kick back and have some fun, it needs to be well maintained in order to remain safe. If there are parts that need to be replaced or problems with your pool, they need to be taken care of immediately. Here are 6 pool repairs that you shouldn’t ignore:
- Pump problems. The pump in your pool is used to help circulate the water supply and can also be used to heat it up. However, if it’s not working correctly, it can cause a multitude of problems. First, it will cost you money. If it’s having problems operating efficiently, your energy bill will go up. Also, it could prevent your water from cycling through the filter, resulting in cloudy or murky water.
- Leaks. It’s normal for water to evaporate from your pool. Especially when the weather gets hot, you may begin to notice that it’s more difficult to keep your water as high as you’d like. However, if the water is disappearing at a rapid rate, you could have a leak on your hands. This will not only raise your water bill, but could result in damage to your landscape, home, and pool equipment, depending on its location.
- Melted fittings. Sometimes, the seal around the pump can become melted and shrunken. When this happens, it’s time to call in a repairman. Usually this occurs when the pump has been turned on but hasn’t had any water flowing through it. If not taken care of, it can cause leaks or damage to the pump.
- Lining tears. The lining in your pool is what keeps the water inside from leaking and flowing into the ground around it. However, the lining can become damaged or worn out over time. If there is a small crack or a hole, it needs to be sealed immediately. Otherwise, you could find yourself dealing with a low water line or other serious issues.
- Filter issues. It’s important that you change your filter regularly. However, if neglected, your filter could begin to act up. It could have a hard time filtering out debris and other bacteria from your pool. While a simple cartridge replacement might do the trick, there is a chance that there is a more serious problem brewing.
- Lighting repairs. The lights in your pool need to be changed just like the lights in your home do. It’s best to do this right as you notice the lights go out. If, after changing the bulb, it still isn’t illuminating, it might be time to call in a repairman as you could be dealing with a more serious issue.
When your pool is your family’s favorite gathering place, it deserves some TLC as well. If you have pool repairs that need to be taken care of, don’t put them off any longer. Otherwise, they could turn into bigger problems that could affect the integrity of your pool.
Check the Water Levels
Rain, heat waves, and rowdy swimmers can change the water levels in your pool. You will need to check the water levels in your pool regularly to ensure proper function. If the water levels are too high, the skimmer will struggle to keep the water clean. If the levels are too low, the skimmer and motor will overwork to suck in water and potentially burn out. Ideally, the surface of the water should be about 1/3 to 1/2 of the way up the skimmer.
Clean the Pool
Even the best filters need a little help now and then. Excess leaves, foreign matter, and dirt can accumulate on the water’s surface, on the walls, or on the floor of a pool. Use brushes and hand skimmers at least once a week to keep your pool spotless. Without this manual care, your pool can become visibly dirty and unsafe, and you can drastically shorten the life span of your filter.
Maintain Your Filters
Your pool’s filter works constantly to keep the water clean and safe for swimmers. Due to their tireless work, these machines need maintenance of their own. Speak with experts in swimming pool care in Atlanta to determine how best to clean and tune up your pool’s filtration system. There are many different types of filters, after all. Even if you had the knowledge to identify them by sight, you should ask a professional how best to care for your specific type and brand of machine.